Giới thiệu
JHA-T11 series is a 10G 10 Gigabit photoelectric conversion equipment between 10G Base-TX electrical signal and 10G Base-FX optical signal, which realizes optical signal equalization amplification, clock extraction and optical regeneration, and is compatible with WDM (DWDM/ CWDM) technology that can achieve optical signal transmission over a long distance in a single fiber by one or more methods. In the existing network infrastructure, it can quickly increase the communication capacity, expand the bandwidth, and at the same time use a low-cost and cost-effective solution to manage and operate the system, which is easy to operate and maintain.
Đặc trưng
- Support Jumbo Frame
- Transparent Transport and very low delay
- Connection between fiber to copper or fiber to fiber 10G Ethernet equipment
- Can be applied in Telecommunication room, R&D laboratory, Data center, etc
- Support ITUT prescribed DWDM/CWDM wavelength
- Support hot plugging
- Full State Led display
- Easy installation
- Supports 3R (Re-generation, Re-timing, Re-shaping) Performance
Thông số kỹ thuật
|
Interface |
Copper Port:10Gbps |
| Fiber Port:10G | |
| Protocol standard | IEEE802.3an(10Gbase-TX), IEEE802.3ae(10Gbase-SR/LR/ER/ZR) |
|
Transmission distance |
Cable:Cat 6a(the max distance up to 100m) |
| multimode : 50/125, 62.5/125μm (the max distance up to 300m) | |
| singlemode : 8.3/125, 8.7/125, 9/125μm (the max distance up to 80km) | |
|
Connector |
1 RJ45 connector:Connect STP/UTP Category 5 Twisted Pair |
| 1 SFP+ Fiber port | |
|
LED indicator |
PWR(power) |
| 1G(Fiber port 1000M) | |
| 10G(Fiber port 10000M) | |
| LINK(Electrical port connection/action) | |
| Power | AC 220V(170-260V) 50Hz;DC 5V，3A |
| Power consumption | <2.5W |
| Operating temperature | -20~70℃ |
| Working humidity | 5%~90% |
| Storage temperature | -40~70℃ |
| Storage humidity | 5%~90% no condensation |
| Dimensions | 140*100*30mm/L*W*H |
Đánh giá
Chưa có đánh giá nào.