Tính Năng
● Loại thẻ hoặc cấu trúc độc lập, được áp dụng khung 4U quản lý tập trung
● Mã kỹ thuật số 8/10 bit và truyền dẫn loại không nén
● Hỗ trợ mọi tín hiệu video độ phân giải cao
● Kênh video 5Hz-10 MHz
● Hệ thống video PAL, NTSC và SECAM tương thích tự động
● Với mạch APC, công suất quang đầu vào không đổi và phạm vi phóng to
● Truyền dẫn cáp quang Kilomega, dung lượng lớn và dễ dàng nâng cấp
● Nguồn cung cấp và chỉ báo trạng thái tham số khác, có thể theo dõi tình trạng hoạt động của hệ thống
● Công nghệ tự thích ứng tiên tiến và không cần thiết phải thực hiện điều chỉnh điện tại chỗ hoặc quang học khi sử dụng
● Thiết kế cấp độ công nghiệp và thiết kế mô đun hóa làm cho sự cân bằng đáng tin cậy và linh hoạt
Thông số kỹ thuật
| OpticalFeature |
Transfer Distance: up to 120km
Connectors: ST/PC, FC/PC optional
Wavelength: 1310nm/1550nm
|
| VideoFeature |
Video Interface: BNC
Video input/output impedance: 75Ω (unbalanced)
Video input/output Voltage: 1VP – P (peak value),Max 1.2Vpp
Video Bandwidth: 10MHz
Video sampling: 15MHz high speed sampling
Video digit bit width: 8/10 bit
Differential gain: （ 10%-90%APL） DG <1%( Typical value)
Differential phase: （ 10%-90%APL） DP <0.8<>°( Typical value)
Video SNR: S/N ≥ 70dB （Maximum optical link path loss）
|
| AudioFeatures |
Audio interface: Forward Direction, Reverse Direction orBi-directional Audio
Interface terminal: Standard industrial connectingterminals
Audio input/output electric level typical: 0dBm
Audio input/output impedance: 600Ω (balanced/unbalanced)
Audio input/output amplitude: 2VP-P(peak value)
Audio bandwidth: 20Hz～20kHz
Sample rate: 58.6K
Nonlinear distortion coefficient: ≤1%
Audio SNR: S/N≥85db
|
| DataFeatures |
Interface：Standard industrialconnecting terminals
Controlling Equipment： PTZ decoder,Keyboard ,data interface of Matrix, High speed dome camera, industrial equipment
Interface Signals: RS-485(2 lines), RS232, RS422 and so on
|
| AlarmFeatures |
Interface：standard industrialconnecting terminals ( Alarm, Switch, Remote control )
Alarm/switch input signals: any active or passivealarm/switch input, supporting passive switch
Alarm/switch output signals: any active or passivealarm/switch output, supporting relay contact output
Current: Low current, High-current and high-voltage can useabove 1A/12V
|
| EthernetFeatures |
Interface Speed Rate: 10/100Mbit/s Auto-adaptation, thedefault is 100MBPS working condition
Interface Type: RJ-45
Supporting Agreements: IEEE802.3U 100Base-TX, 10/100M
Communication Working format: Full-duplex or half-duplex
|
| TelephoneFeatures |
Physical Interface: RJ-11 Connector Jack
Voice Bandwidth: 8KHZ
Operating Mode: Point-to-point hotline, programcontrolled switch/extension mode
|
| GeneralParameter |
Operating Temperature: -40 ℃～+85 ℃
Storage Temperature: -45 ℃～+95 ℃
Relative humidity: 0～95%(Non-condensing)
Power Voltage: AC85-260v/50Hz
MTBF：≥105 hours
Housing: Metal enclosure
|
| OpticalFeature |
Transfer Distance: up to 120km
Connectors: ST/PC, FC/PC optional
Wavelength: 1310nm/1550nm
|
| VideoFeature |
Video Interface: BNC
Video input/output impedance: 75Ω (unbalanced)
Video input/output Voltage: 1VP – P (peak value),Max 1.2Vpp
Video Bandwidth: 10MHz
Video sampling: 15MHz high speed sampling
Video digit bit width: 8/10 bit
Differential gain: （ 10%-90%APL） DG <1%( Typical value)
Differential phase: （ 10%-90%APL） DP <0.8<>°( Typical value)
Video SNR: S/N ≥ 70dB （Maximum optical link path loss）
|
| AudioFeatures |
Audio interface: Forward Direction, Reverse Direction orBi-directional Audio
Interface terminal: Standard industrial connectingterminals
Audio input/output electric level typical: 0dBm
Audio input/output impedance: 600Ω (balanced/unbalanced)
Audio input/output amplitude: 2VP-P(peak value)
Audio bandwidth: 20Hz～20kHz
Sample rate: 58.6K
Nonlinear distortion coefficient: ≤1%
Audio SNR: S/N≥85db
|
| DataFeatures |
Interface：Standard industrialconnecting terminals
Controlling Equipment： PTZ decoder,Keyboard ,data interface of Matrix, High speed dome camera, industrial equipment
Interface Signals: RS-485(2 lines), RS232, RS422 and so on
|
| AlarmFeatures |
Interface：standard industrialconnecting terminals ( Alarm, Switch, Remote control )
Alarm/switch input signals: any active or passivealarm/switch input, supporting passive switch
Alarm/switch output signals: any active or passivealarm/switch output, supporting relay contact output
Current: Low current, High-current and high-voltage can useabove 1A/12V
|
| EthernetFeatures |
Interface Speed Rate: 10/100Mbit/s Auto-adaptation, thedefault is 100MBPS working condition
Interface Type: RJ-45
Supporting Agreements: IEEE802.3U 100Base-TX, 10/100M
Communication Working format: Full-duplex or half-duplex
|
| TelephoneFeatures |
Physical Interface: RJ-11 Connector Jack
Voice Bandwidth: 8KHZ
Operating Mode: Point-to-point hotline, programcontrolled switch/extension mode
|
| GeneralParameter |
Operating Temperature: -40 ℃～+85 ℃
Storage Temperature: -45 ℃～+95 ℃
Relative humidity: 0～95%(Non-condensing)
Power Voltage: AC85-260v/50Hz
MTBF：≥105 hours
Housing: Metal enclosure
|
Thông tin sản phẩm
| Model No. | Description |
|---|---|
| OPT-S8V-T/RF | 8 Channel Video, FC |
| OPT-S8V1D-T/RF | 8 Channel Video + 1 Channel Data, FC |
| OPT-S8V1D1A-T/RF | 8 Channel Video + 1 Channel Data + 1 Channel Audio, FC |
Đánh giá
Chưa có đánh giá nào.